Kawasaki KLR-650 465 Series Single Shock Supplement
download Mount the shock as you would your stock shock per your authorized shop manual (with the rebound adjustment at the bottom) noting the following: n As you mount the shock, feed the Remote...
View ArticleHarley-Davidson XL 883 and 1200 MODELS SADDLEBAG SUPPORT KIT INSTALLATION...
download 1. 1994-99 models: Remove upper shock absorber nut, washer, shock cover and backing washer. Save nut and washer and discard shock cover and backing washer. 2000-03 models: Remove upper shock...
View ArticleAPRILIA PEGASO 650 STRADA Assembling instructions
download Centre stand APRILIA PEGASO 650 STRADA Item-No.: 505.791 2 quantitem no. description 1 712.1002centre stand 2 151.124 bolt 17,7 x ø40 2 150.994 washer ø19 x ø30 x 2,7 4 150.995 washer ø8,4 x 3...
View ArticleHonda ST 1300 Series Single Shock Supplement
download Check the orientation of the adjuster on the shock body – looking at the top of the shock, the hydraulic line port should be165 degrees (clockwise) from the nitrogen pressure valve (see figure...
View ArticleBMW K-SERIES (INCLUDING PARALEVER) SHOCK MOUNTING INSTRUCTIONS
download 1. The shock mounts with the hose towards the rear of the machine, with the shock body at the top and the shaft pointing downward. 2. Take the inside half of the bushing set on the shock eye...
View ArticleKTM Enduro Engineering Shock Spring Removal And Installation Instructions
download 1 Place motorcycle on a stand so that the rear wheel is off the ground. 2 Remove the upper shock bolt. (Figure 1) 3 Remove the lower shock bolt. (Figure 2) 4 Remove the shock from the...
View ArticleVespa GTS Super Specification
download Gts super 300 ie Gts super 125 ie s 125cc s 50cc Gts 250 ie Gts 125cc LX 125cc LX 50cc 2 stroke Engine Single-cylinder, catalised, QUASAR 4 stroke, 4 valve electronic injection Single-cylinder...
View ArticleHARLEY-DAVIDSON SOFTAIL MODELS STEALTH AIR SHOCK MOUNTING
download INSTALLATION 1. Remove the seat, inner fender, and ignition coil cover. Removing the rear wheel assembly is recommended for ease of installation, but not absolutely necessary. Remove the nut...
View ArticleHARLEY DAVIDSON LOW REAR SHOCK KIT INSTALLATION MANUAL
download See Figure 3 and Table 1. INSTALLATION Shock Absorbers Perform this installation when the engine is cool. Working on or near the exhaust system when the engine is hot could result in severe...
View ArticleATK 50MX INSTALLATION AND ADJUSTMENT TIPS
download PRELOAD ADJUSTMENT— On some Works shocks a threaded preload is standard. This allows the adjustment of the ride height of the motorcycle. The preload is changed by turning a threaded nut down...
View Article
More Pages to Explore .....